Revolving End Table
Give a twist to the traditional end table with a revolving version that swings around for easy and convenient access of all sides. Table features an open storage area with adjustable shelf, built-in magazine rack, pullout shelf and storage cabinet behind a faux-drawer front. Composite wood with wood veneer. Assembly required. 19" sq. x 23" h.
Ratings & Reviews
Revolving End Table is rated out of 5 by 220.
Rated 2 out of 5 by Dot1300 from Looks nice only Looks nice not easy to put together instructions not clear table just sits on base I don’t like that plus I thought there was draws but it’s only a one compartment. I would not get another
Date published: 2019-04-27
Rated 5 out of 5 by Ree from Great table It rotates has a secret compartment place to put movies magazines it has an expandable top worth every penny.
Date published: 2019-04-10
Rated 1 out of 5 by dee from Beautiful but junk While trying to put together, fell apart. Beautiful but not worth the money.
Date published: 2019-03-24
Rated 1 out of 5 by Kathy from Revolving End Table This piece of furniture is a piece of junk. It was a real pain to put together, the fake front door had a broken corner that I had to glue back together, then it didn't go where it was sussed to go,plus the pieces od screws were aluminum and broke while asembling so now the sliding shelf doesn't stop and goes all the way to the back. This was define try not worth the money I paid for it ! ! ! I am very upset and would like a refund, because it's going in the dumpster! ! !
Date published: 2019-01-30
Rated 1 out of 5 by Hannah from Craptastic The holes did not line up. There was missing hardware,never ever buy this product.could not use it.
Date published: 2019-01-26
Rated 4 out of 5 by DJHud from If you get it together, you will love it! My mother has had one of these for over 10 years and it still solid and admired by all, even though it has been moved 3 times, and is made of composition wood. They still talk about the day my brother put it together, in that he was furious because it was so difficult. Well, it is still very difficult to assemble and I have a lot of experience assembling furniture and toys, so I know what I'm doing. Shortly after I began, I made the decision to drill tap holes and use screws which turned out to be a great decision. This is because some of the CAM piston holes are too deep and therefore the CAMs won't grab the piston. Only the CAM holes that hold the table top were engineered correctly. No matter, my strategic placement of thin (6 x 1.25" deck screws) more than did the trick. The piece looks great and is very functional. I absolutely love it and you will too, if you can get it together properly. The only alternative I could find to this piece is from the Amish, made of solid wood, preassembled and extremely sturdy. The least expensive version they offer is about $450 and goes up to around $1000. I would've paid that money for one, but I didn't like the layout of any of them as compared to this piece. I always want solid wood, but the functional design of this piece won out and is of course, much less expensive. I recommend if you think you can handle the challenge of assembly.
Date published: 2019-01-23
Rated 1 out of 5 by Nicole411 from What a shame What a shame because the pieces are actually nice. The cam screws don't reach the cams no matter the adjustments. They just don't catch. The back piece is held on by ONE dowel and fell apart a number of times. The top lifted right off too. Too expensive for a piece of furniture you can't assemble alone and doesn't stay put together.
Date published: 2018-11-30
Rated 1 out of 5 by nina hyde from NICE, BUT NOT WORTH IT The cam's are not measured correctley to cam rods. you have to glue on four sides at once which makes it impossible to backtrack after 1 hour or more. you need to preset all the cam rods before putting together. I had 3 cam rods which did not fit regardless of adjustment because the holes for the cams were too far.
Date published: 2018-07-29
- bvseo_sdk, dw_cartridge, 16.1.1, p_sdk_3.2.0
- CLOUD, getContent, 132ms
- reviews, product
Question & Answer
What are the size of the shelf openings
Hello Jim, The size of the adjustable shelf opening is 6 3/8 inches wide by 10 3/8 inches deep by 17 inches high (without the shelf in it). Thank you for reaching out to us.
Date published: 2019-04-29
What are the dimensions of the pull out tray
Hello, The Revolving End Tables pullout shelf is 15 5/8 inches wide x 8 1/2 inches deep. If you have any further questions or concerns, please feel free to contact our Customer Service at Customerservice@seventhavenue.com.
Date published: 2019-04-23
- bvseo_sdk, dw_cartridge, 16.1.1, p_sdk_3.2.0
- CLOUD, getContent, 118ms
- questions, product